|Place of Origin:||China|
|Minimum Order Quantity:||1set|
|Packaging Details:||Wood case|
|Delivery Time:||8-15working day|
|Payment Terms:||L/C, T/T, Western Union|
|Name:||Seal Packing Machine Food Meal Tray Sealing Commercial Packing Machine||Voltage:||110V/220V Or OEM|
|Film Size:||180X150mm||Packing Weight:||25kg|
|Tray Size:||≤224x160x85||Packing Speed:||6-8box/min|
|Key Selling Points:||High Productivity||Automatic Grade:||Automatic|
packaging sealing machine,
vacuum sealer machine
High Productivity Tray Sealing Machine Automatic Meat Packaging Vacuum Sealer
Simply load the tray into the tray cavity, pull the film roll from the back of the machine over the tray to completely cover the tray ,Pull down the handle of the heated top platen and apply pressure to produce a seal,Release the handle and the top platen is spring loaded and will Automatically return to the up position, remove sealed tray to complete the sealing cycle.Features digital temperature control and is constructed in 304stainless steel. machine will run trays.
Fresh meat, process meat, sea food, vegetable, agriculture products, tea leaves, herbs, powder pices, prepard food
Electric parts, hard ware products, medical instruments, medicine cloting and so on...
RDS200 desktop tray sealing machine is designed according to the food needs of the modern taste, for packaging the food of different tastes. It seals quickly. Packaged food does not drip, and has health appearance.
This machine is a food tray sealing machine, suit for food catering companies, fast food restaurants, hotels, tourist areas and other places. It is convenient and hygienic, you can also carry home taste without the soup overflow.
|Product name||Seal Packing Machine Food Meal Tray Sealing Commercial Packing Machine|
|Voltage||110V/220V or OEM|
|Main Structure Mate||304 Stainless steel,Aluminum alloy|
Common malfunction and solutions:
The seal is incomplete or cannot be sealed
|Damaged silicone strip in the lower mold holder||Replace the silicone strip|
|Oil or wrinkles on the surface of the packaging material||Cleans oil and treats wrinkles|
|The sealing temperature is unreasonable||Adjust according to the actual situation of packaging materials|
|Heating is not turned on||Turn on heating|
|Not enough sealing pressure or time||Increase sealing strength and sealing time|
|Box and film materials do not match||Replace the box or film material|
Heating mold "sticky box"
|The hot ironing board has dirt||After the machine stops and waits for the upper mold to cool, use a cleaning cloth dipped in alcohol to clean and remove surface dirt|
|There are foreign objects on the surface of the sealing film||Clean up foreign objects|
|The non-stick layer on the surface of the heating ironing board falls off||After the machine stops and waits for the upper mold to cool, remove the hot plate and send it back to the company to re-spray the non-stick layer|
|Heat seal temperature is set too high||Adjust heat sealing temperature|
|Temperature probe short circuit||Turn off the power and check if the heating circuit is shorted|
Film cut continuously
|Cutter blade deformed curling tooth||After the machine stops and waits for the upper die to cool down, remove the cutter and straighten the cutting edge of the winding tooth. If it still cuts continuously, replace the cutter|
|The width of the film is not enough to hold the film||Replace the appropriate width film|
|The thin film silicone strip is damaged and the film is not compressed||Replace the upper molded silicone strip|
Startup and equipment operation:
Step 1: Turn on the main power switch of the device until the power switch turns on
Step 2: Seal the device
2.1 Set temperature: Press the up and down keys on the temperature control display (see Figure 1.1) to increase or decrease the temperature to a suitable temperature.
2.2 Place the tray in the lower model cavity, pull the film to completely cover the upper surface of the box to a suitable position, hold the handle and press the upper mold down firmly, press it to the lowest point, and stabilize it for 3-4s Adjust the arm strength), then loosen the upper mold and raise it to the initial position. Such a reciprocating cycle can complete a batch of box sealing and film cutting;
Step 3: When you do not need to use the device, just turn off the device power switch.
Q: Are you a factory or a trading company?
A: We are a factory manufacturing.
Q: Can you send me the video to show how the machine works?
A: Certainly, we have video of every standard machine and can send to you by Email or other way you want.
Q: How can I pay my order?
A: We accept T/T, Western Union, Alibaba Online Payment to pay.
Q: Do you have any certificate?
A:We have passed ISO9001:2008,ISO14001,OHSAS18001 and obtained CE certificate.
Q: Why the model name of your machine same as the machine form other company?
A: Since these machines have long history and are very popular in the market, it may be indeed possible that some machine models are similar as others. What we may think is that the machine model does not make big difference. And the criteria for machines may depend on the technical support and quality of the machines.
Q: How about your warranty?
A: Our warranty is 12 months. Normally, the general after-sale service may be as below:
1) The technical support is permanent.
2) The paid spares parts could be provided at any time.
3) We have dealers in some countries to offer compensable service.
Contact Person: Tina